Retrofit from other OMD to VISATRON VN301Plus 1
Vessel type:
Container vessel
Engine type:
Main Engine
Engine Model:
MAN B&W 10K98MC-C
OMD mode:
VN301Plus
Remarks:
- Weld & mount 2x new console bracket on the engine crankcase to mount the VISATRON VN301plus Central Unit (2x for more than 10x suction points);
- Install 2x VN301plus Central Unit (CU no.1 @ cylinder 3 position & CU no. 2 @ cylinder 6 position);
- Re-use existing G3/4" suction holes on engine crankcase compartment (total 12x suction points);
- Install with VN301plus sensors on the 10x crankcase compartments, 1x chain case compartment & 1x Thrust bearing compartment;
- New hybrid cable installation & layout to all suction points;
- New compress air supply pipe routing & layout;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of Remote Indicators in ECR console (combining all existing Remote Indicators for Main Engines & Aux Engines);
Retrofit from other OMD to VISATRON VN115/87Plus
Vessel type:
Container vessel
Engine type:
Diesel Generator Engine (No. 1, 2 & 3)
Engine Model:
MAN B&W 9L32/40
OMD mode:
VN115/87Plus
Remarks:
- Weld/Mount a new console bracket on engine crankcase to mount the VISATRON VN115/87plus Oil Mist Detector;
- Make new mounting holes for VN180 Siphon blocks @ suction points;
- Install with Schaller’s sampling funnels;
- New piping installation layout with siphon blocks & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of new Remote Indicator II on ECR console;
Retrofit from other OMD to VISATRON VN115/87Plus
Vessel type:
Research Survey vessel
Engine type:
Main Engine (No. 1, 2 & 3)
Engine Model:
MAN B&W 9L32/40
OMD mode:
VN115/87Plus
Remarks:
- Weld/mount a new console bracket on the frame structure of the engine to mount the VISATRON VN115/87plus Oil Mist Detector;
- Make new G3/4 suction holes on crankcase doors;
- Install with Schaller’s sampling funnels;
- New piping installation layout with flexible hose & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console
New Installation of VISATRON VN215/87Plus
Vessel type:
Container vessel
Engine type:
Main Engine
Engine Model:
MAN B&W 8S60MC-C
OMD mode:
VN215/87Plus
Remarks:
- Weld/Mount a new console bracket on the walkway structure of the engine to mount the VISATRON VN215/87plus Oil Mist Detector;
- New G3/4" suction holes are pre-drilled on engine crankcase compartment prior to installation;
- Install with Schaller’s sampling funnels;
- New piping installation layout with flexible hose & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of new Remote Indicator II on ECR console;
Retrofit from other OMD to VISATRON VN215/87Plus
Vessel type:
Oil/Chemical tanker vessel
Engine type:
Main Engine
Engine Model:
MAN B&W 6S42MC6
OMD mode:
VN215/87Plus
Remarks:
- Weld/Mount a new console bracket on the Structure of the engine to mount the VISATRON VN215/87plus Oil Mist Detector;
- Re-use existing G3/4" suction holes on engine crankcase compartment;
- Install with Schaller’s sampling funnels;
- New piping installation layout & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of new Remote Indicator II on ECR console;
Retrofit from other OMD to VISATRON VN215/87Plus
Vessel type:
Bulk Carrier vessel
Engine type:
Main Engine
Engine Model:
MAN B&W 6S42MC6
OMD mode:
VN215/87Plus
Remarks:
- Weld& mount a new console bracket on the engine crankcase to mount the VISATRON VN215/87plus Oil Mist Detector;
- Re-use existing G3/4" suction holes on Engine Crankcase compartment;
- Install with Schaller’s sampling funnels;
- New piping installation layout & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
Retrofit from other OMD to VISATRON VN215/87Plus
Vessel type:
Container vessel
Engine type:
Main Engine
Engine Model:
WARTSILA 8RT-FLEX68D
OMD mode:
VN215/87Plus
Remarks:
- Secure & mount a new holder bracket on the structure of the engine to mount the VISATRON VN215/87plus Oil Mist Detector;
- Re-use existing G3/4" suction holes on engine crankcase compartment;
- Install with Schaller’s engine wall connector & sampling funnel;
- New piping installation layout & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of new Remote Indicator II on ECR console;
Upgrade from VISATRON VN87-EMC to VISATRON 87Plus
Vessel type:
Container vessel
Engine type:
Main Engine
Engine Model:
WARTSILA 9L46D
OMD mode:
VN215/87Plus
Remarks:
- Upgrade from VISATRON VN215/87-EMC to VN215/87plus Oil Mist Detector;
- Clean & service overhaul of OMD parts & accessories;
- Replace & install with VN215/87plus Oil Mist Detector;
- Replace the service spare parts;
- Test the functionality & alarm signal for retrofitted OMD;
Retrofit from other OMD to VISATRON VN301plus 2
Vessel type:
Container vessel
Engine type:
Main Engine
Engine Model:
MAN B&W 10K98MC-C
OMD mode:
VN301Plus
Remarks:
- Weld & mount 2x new console bracket on the engine crankcase to mount the VISATRON VN301plus Central Unit (2x for more than 10x suction points);
- Install 2x VN301plus Central Unit (CU no.1 @ cylinder 3 position & CU no. 2 @ cylinder 6 position);
- Re-use existing G3/4" suction holes on engine crankcase compartment (total 12x suction points);
- Install with VN301plus sensors on the 10x crankcase compartments, 1x chain case compartment & 1x Thrust bearing compartment;
- New hybrid cable installation & layout to all suction points;
- New compress air supply pipe routing & layout;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of Remote Indicators in ECR console (combining all existing Remote Indicators for Main Engines & Aux Engines);
Retrofit from other OMD to VISATRON VN215/87Plus
Vessel type:
Container vessel
Engine type:
Main Engine
Engine Model:
MAN B&W 12K98ME-C
OMD mode:
VN215/87Plus
Remarks:
- Weld/mount a new console bracket on engine crankcase to mount the VISATRON VN215/87plus Oil Mist Detector;
- Reusing the suction points (G3/4" thread size);
- New piping installation layout for both suction pipe & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of new Remote Indicator II on ECR console;
Retrofit from other OMD to VISATRON VN115/87Plus
Vessel Type:
Container vessel
Engine Type:
Diesel Generator Engine (No. 1, 2, 3 & 4)
Engine Model:
MAN B&W 7L32/40
OMD Model:
WVN115/87Plus
Remarks:
- New console bracket for VISATRON VN115/87plus Oil Mist Detector to be mounted on existing thread holes on engine;
- Reusing the suction points (G3/4 thread size);
- Install with Schaller’s sampling funnel @ suction points;
- New piping installation layout for both suction pipe & compress air supply;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of new Remote Indicator II on ECR console;
Retrofit from other OMD to VISATRON VN215/87Plus
Vessel type:
Dredger vessel
Engine type:
Main Engines (Port and Starboard)
Engine Model:
Sulzer 12ZAV40S
OMD mode:
VN215/87Plus
Remarks:
- Weld/Mount a new console bracket on engine crankcase to mount the VISATRON VN215/87plus Oil Mist Detector;
- Reusing the existing piping system to the suction point;
- New piping connection from OMD to the existing piping system;
- Re-laying of compress air piping;
- Re-wiring of alarm signal & power supply from OMD to ECR/ECR console;
- Installation of remote indicator in ECR console;